PhosphoSan BP

Multi-Purpose Acid Cleaner Sanitizer

* Purpose

PhosphoSan BP is a concentrated, acid base quaternary ammonium sanitizer and disinfectant for use on all surfaces found in meat, poultry and seafood operations, wherever fast, broad spectrum antimicrobial activity is desired. The antimicrobial activity of PhosphoSan BP covers a broad range of microorganisms, including gram positive and gram negative bacteria, viruses and molds. When used as directed, it is non-staining and does not leave any residual odor or taste. PhosphoSan BP is useful in controlling the growth of mold and mildew, as well as a wide range of bacteria.

* Typical Applications

PhosphoSan BP is recommended for sanitizing and disinfectant applications in meat, poultry, seafood and vegetable processing operations, on equipment surfaces, floors, walls, or wherever microbial control is desired. All recommended use concentrations of PhosphoSan BP are safe to use on aluminum, zinc, brass, copper, steel, or stainless steel, as well as tile, brick, porcelain, and painted surfaces. PhosphoSan BP is effective using any water temperature for application. Application temperature is discretionary, dependent on a food facility’s needs for controlling condensation at the end of a sanitation shift, prior to immediate production start.

* Advantages

Effective in Hard Water – Destroys a wide spectrum of microorganisms typically found in meat, poultry, seafood and vegetable processing operations in up to 2500 ppm hard water.

Safe On All Surfaces – Will not corrode or darken any surfaces when used as directed.

* Properties

PhosphoSan BP is a light pink clear liquid with a mild odor. PhosphoSan BP has a low pH and has a Specific Gravity of 1.345 (11.22 lbs./gallon).

* Use Directions

Clean surfaces thoroughly with recommended LW Chemical products. Prepare a 400 ppm active quaternary solution using 2 oz. of PhosphoSan BP in 4 gallons of water. Allow sanitizer solution to contact surfaces for a minimum of 2 minutes. Allow surfaces to drain thoroughly prior to start up. No potable water rinse is necessary, unless required by public health authorities.

* Packaging

Available in 55 gallon plastic drums.

* Authorization

PhosphoSan BP is authorized by the USDA for use under category code letter:

D2: Sanitizers for all surfaces not always requiring a rinse.

PhosphoSan BP


DANGER:

HAZARDOUS TO HUMANS AND DOMESTIC ANIMALS.

Corrosive. Keep Out Of Reach Of Children. Causes eye and skin damage. Do not get in eyes, on skin, or on clothing. Wear goggles or face shield and rubber gloves when handling. Harmful or fatal if swallowed or absorbed through skin. Avoid contamination of food.

STATEMENT OF PRACTICAL TREATMENT.

In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. For eyes, call a physician. Remove and wash contaminated clothing before reuse. If swallowed, drink promptly a large quantity of water. Avoid alcohol. Call a physician immediately.

NOTE TO PHYSICIAN: Probable mucosal damage may contraindicate the use of gastric lavage. Measures against circulatory shock, respiratory depression and convulsion may be needed.

STORAGE AND DISPOSAL:

DO NOT CONTAMINATE WATER, FOOD, OR FEED BY STORAGE OR DISPOSAL. OPEN DUMPING IS PROHIBITED. DO NOT REUSE EMPTY CONTAINER.

PESTICIDE DISPOSAL: Pesticides, spray mixture or rinse water that cannot be used according to label instructions must be disposed of according to Federal or approved State procedures under Subtitle C of the Resource Conservation and Recovery Act.

CONTAINER DISPOSAL: Triple rinse. Then offer for recycling or reconditioning, or dispose of in a sanitary landfill, or by incineration if allowed by State and local authorities.

GENERAL CLASSIFICATION. It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

Commodity Code:

Deodorants or Disinfectants, Other Than Medicinal